TOPIC:

My quote form includes about 150 line items, where each line consists of three elements –
Quantity which is input by the customer
Price which is automatically calculated based on the Quantity
Ext Price which is calculated by (Quantity * Price), and is like this on the form –

(see attached png image for A and
A ) when the form opens and before any customer input …

B ) After customer input …

I have two issues I don’t know how to resolve:

1) In my “Mailback Emails” I only want to report “Nonempty values” but the “0” in A ) above shows in the Mailback report as 0 and is not empty. I don’t want anything reported unless it is from the calculation AFTER A CUSTOMER INPUT of Quantity as in B ).

2) I need the Price and the Ext. Price values to display with 2 decimals and with the thousands separator, i.e. B ) above should show –

Cuff Outfit 1 – Quantity 10 Price $: 1,965.87 Ext. Price $: 19,658.70

I will appreciate help in solutions to these two items.
Thank you.

P.S. the code for the calculations that Tihana guided me with is as below:

function ff_quotegeneratorproto02_init() {
setInterval('calc()',500);
} // ff_quotegeneratorproto02_init

function calc() {

if(ff_getElementByName('coonequantity').value > 0 && ff_getElementByName('coonequantity').value <=5) {
ff_getElementByName('cooneprice').value=2069.34;
}
else if(ff_getElementByName('coonequantity').value > 5 && ff_getElementByName('coonequantity').value <=30) {
ff_getElementByName('cooneprice').value=1965.87;
}
else if(ff_getElementByName('coonequantity').value >30 && ff_getElementByName('coonequantity').value <=72) {
ff_getElementByName('cooneprice').value=1862.40;
}
else if(ff_getElementByName('coonequantity').value >72 && ff_getElementByName('coonequantity').value <=249) {
ff_getElementByName('cooneprice').value=1758.94;
}
else if(ff_getElementByName('coonequantity').value >250) {
ff_getElementByName('cooneprice').value=1696.86;
}

ff_getElementByName('cooneextprice').value =
Number(ff_getElementByName('cooneprice').value) *
Number(ff_getElementByName('coonequantity').value);

On the issue of setting the mailback to only print non-empty items, is there a way to implement an "onchange" like event into each line item such that if the customer doesn't make a change to the item quantity that item's price won't show and it's calculation won't occur and therefore the "0" might not be there?

Hi,

maybe I should to "recreate" calculation function that 0 is not shown
But I can't find your access information for me, please post it here again, because here is multiple messages on the forum


Regards,
Tihana

Here is my post again ...

My quote form includes about 150 line items, where each line consists of three elements –
Quantity which is input by the customer
Price which is automatically calculated based on the Quantity
Ext Price which is calculated by (Quantity * Price), and is like this on the form –

(see attached png image for A and B )
A ) when the form opens and before any customer input …

B ) After customer input …

I have two issues I don’t know how to resolve:

1) In my “Mailback Emails” I only want to report “Nonempty values” but the “0” in A ) above shows in the Mailback report as 0 and is not empty. I don’t want anything reported unless it is from the calculation AFTER A CUSTOMER INPUT of Quantity as in B ).

2) I need the Price and the Ext. Price values to display with 2 decimals and with the thousands separator, i.e. B ) above should show –

Cuff Outfit 1 – Quantity 10 Price $: 1,965.87 Ext. Price $: 19,658.70

I will appreciate help in solutions to these two items.
Thank you.

P.S. the code for the calculations that Tihana guided me with is as below:

function ff_quotegeneratorproto02_init() {
setInterval('calc()',500);
} // ff_quotegeneratorproto02_init

function calc() {

if(ff_getElementByName('coonequantity').value > 0 && ff_getElementByName('coonequantity').value <=5) {
ff_getElementByName('cooneprice').value=2069.34;
}
else if(ff_getElementByName('coonequantity').value > 5 && ff_getElementByName('coonequantity').value <=30) {
ff_getElementByName('cooneprice').value=1965.87;
}
else if(ff_getElementByName('coonequantity').value >30 && ff_getElementByName('coonequantity').value <=72) {
ff_getElementByName('cooneprice').value=1862.40;
}
else if(ff_getElementByName('coonequantity').value >72 && ff_getElementByName('coonequantity').value <=249) {
ff_getElementByName('cooneprice').value=1758.94;
}
else if(ff_getElementByName('coonequantity').value >250) {
ff_getElementByName('cooneprice').value=1696.86;
}

ff_getElementByName('cooneextprice').value =
Number(ff_getElementByName('cooneprice').value) *
Number(ff_getElementByName('coonequantity').value);

Hi,

I think we don't understood each other

I asked for your login information and backend link, I know that you already sent it to me, but I can't find it, because there is more login information on the forum

Thanks for undestanding

Regards,
Tihana

I don't know what "multiple login" means. I must be doing something wrong, but I don't know what it is. Can you try again to tell me what I need to do? I can send you access to site if you give me confidential instructions.